cvtsudoers(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | FILES | EXAMPLES | SEE ALSO | AUTHORS | BUGS | SUPPORT | DISCLAIMER | COLOPHON

CVTSUDOERS(1)            General Commands Manual           CVTSUDOERS(1)

NAME         top

       cvtsudoers — convert between sudoers file formats

SYNOPSIS         top

       cvtsudoers [-ehMpV] [-b dn] [-c conf_file] [-d deftypes] [-f
       output_format] [-i input_format] [-I increment] [-l log_file] [-m
       filter] [-o output_file] [-O start_point] [-P padding] [-s
       sections] [input_file ...]

DESCRIPTION         top

       The cvtsudoers utility accepts one or more security policies in
       either sudoers or LDIF format as input, and generates a single
       policy of the specified format as output.  The default input
       format is sudoers. The default output format is LDIF.  It is only
       possible to convert a policy file that is syntactically correct.

       If no input_file is specified, or if it is ‘-’, the policy is
       read from the standard input.  Input files may be optionally
       prefixed with a host name followed by a colon (‘:’) to make the
       policy rules specific to a host when merging multiple files.  By
       default, the result is written to the standard output.

       The options are as follows:

       -b dn, --base=dn
               The base DN (distinguished name) that will be used when
               performing LDAP queries.  Typically this is of the form
               “ou=SUDOers,dc=my-domain,dc=com” for the domain my-
               domain.com.  If this option is not specified, the value
               of the SUDOERS_BASE environment variable will be used
               instead.  Only necessary when converting to LDIF format.

       -c conf_file, --config=conf_file
               Specify the path to the configuration file.  Defaults to
               /etc/cvtsudoers.conf.

       -d deftypes, --defaults=deftypes
               Only convert Defaults entries of the specified types.
               One or more Defaults types may be specified, separated by
               a comma (‘,’).  The supported types are:

               all      All Defaults entries.

               global   Global Defaults entries that are applied
                        regardless of user, runas, host, or command.

               user     Per-user Defaults entries.

               runas    Per-runas user Defaults entries.

               host     Per-host Defaults entries.

               command  Per-command Defaults entries.

               See the Defaults section in sudoers(5) for more
               information.

               If the -d option is not specified, all Defaults entries
               will be converted.

       -e, --expand-aliases
               Expand aliases in input_file.  Aliases are preserved by
               default when the output format is JSON or sudoers.

       -f output_format, --output-format=output_format
               Specify the output format (case-insensitive).  The
               following formats are supported:

               CSV      CSV (comma-separated value) files are often used
                        by spreadsheets and report generators.  See “CSV
                        output format” for more details.

               JSON     JSON (JavaScript Object Notation) files are
                        usually easier for third-party applications to
                        consume than the traditional sudoers format.
                        The various values have explicit types which
                        removes much of the ambiguity of the sudoers
                        format.  See “JSON output format” for more
                        details.

               LDIF     LDIF (LDAP Data Interchange Format) files can be
                        imported into an LDAP server for use with
                        sudoers.ldap(5).

                        Conversion to LDIF has the following
                        limitations:

                        Command, host, runas, and user-specific
                           Defaults lines cannot be translated as they
                           don't have an equivalent in the sudoers LDAP
                           schema.

                        Command, host, runas, and user aliases are
                           not supported by the sudoers LDAP schema so
                           they are expanded during the conversion.

               sudoers  Traditional sudoers format.  A new sudoers file
                        will be reconstructed from the parsed input
                        file.  Comments are not preserved and data from
                        any include files will be output inline.

       --group-file=file
               When the -M option is also specified, perform group
               queries using file instead of the system group database.

       -h, --help
               Display a short help message to the standard output and
               exit.

       -i input_format, --input-format=input_format
               Specify the input format.  The following formats are
               supported:

               LDIF     LDIF (LDAP Data Interchange Format) files can be
                        exported from an LDAP server to convert security
                        policies used by sudoers.ldap(5).  If a base DN
                        (distinguished name) is specified, only sudoRole
                        objects that match the base DN will be
                        processed.  Not all sudoOptions specified in a
                        sudoRole can be translated from LDIF to sudoers
                        format.

               sudoers  Traditional sudoers format.  This is the default
                        input format.

       -I increment, --increment=increment
               When generating LDIF output, increment each sudoOrder
               attribute by the specified number.  Defaults to an
               increment of 1.

       -l log_file, --logfile=log_file
               Log conversion warnings to log_file instead of to the
               standard error.  This is particularly useful when merging
               multiple sudoers files, which can generate a large number
               of warnings.

       -m filter, --match=filter
               Only output rules that match the specified filter.  A
               filter expression is made up of one or more key = value
               pairs, separated by a comma (‘,’).  The key may be “cmnd”
               (or “cmd”), “host”, “group”, or “user”.  For example,
               user = operator or host = www.  An upper-case Cmnd_Alias,
               Host_alias, or User_Alias may be specified as the “cmnd”,
               “host”, or “user”.

               A matching sudoers rule may also include users, groups,
               and hosts that are not part of the filter.  This can
               happen when a rule includes multiple users, groups, or
               hosts.  To prune out any non-matching user, group, or
               host from the rules, the -p option may be used.

               By default, the password and group databases are not
               consulted when matching against the filter so the users
               and groups do not need to be present on the local system
               (see the -M option).  Only aliases that are referenced by
               the filtered policy rules will be displayed.

       -M, --match-local
               When the -m option is also specified, use password and
               group database information when matching users and groups
               in the filter.  Only users and groups in the filter that
               exist on the local system will match, and a user's groups
               will automatically be added to the filter.  If the -M is
               not specified, users and groups in the filter do not need
               to exist on the local system, but all groups used for
               matching must be explicitly listed in the filter.

       -o output_file, --output=output_file
               Write the converted output to output_file.  If no
               output_file is specified, or if it is ‘-’, the converted
               sudoers policy will be written to the standard output.

       -O start_point, --order-start=start_point
               When generating LDIF output, use the number specified by
               start_point in the sudoOrder attribute of the first
               sudoRole object.  Subsequent sudoRole object use a
               sudoOrder value generated by adding an increment, see the
               -I option for details.  Defaults to a starting point of
               1.  A starting point of 0 will disable the generation of
               sudoOrder attributes in the resulting LDIF file.

       --passwd-file=file
               When the -M option is also specified, perform passwd
               queries using file instead of the system passwd database.

       -p, --prune-matches
               When the -m option is also specified, cvtsudoers will
               prune out non-matching users, groups, and hosts from
               matching entries.

       -P padding, --padding=padding
               When generating LDIF output, construct the initial
               sudoOrder value by concatenating order_start and
               increment, padding the increment with zeros until it
               consists of padding digits.  For example, if order_start
               is 1027, padding is 3, and increment is 1, the value of
               sudoOrder for the first entry will be 1027000, followed
               by 1027001, 1027002, etc.  If the number of sudoRole
               entries is larger than the padding would allow,
               cvtsudoers will exit with an error.  By default, no
               padding is performed.

       -s sections, --suppress=sections
               Suppress the output of specific sections of the security
               policy.  One or more section names may be specified,
               separated by a comma (‘,’).  The supported section name
               are: defaults, aliases and privileges (which may be
               shortened to privs).

       -V, --version
               Print the cvtsudoers and sudoers grammar versions and
               exit.

   Merging multiple files
       When multiple input files are specified, cvtsudoers will attempt
       to merge them into a single policy file.  It is assumed that user
       and group names are consistent among the policy files to be
       merged.  For example, user “bob” on one host is the same as user
       “bob” on another host.

       When merging policy files, it is possible to prefix the input
       file name with a host name, separated by a colon (‘:’).  When the
       files are merged, the host name will be used to restrict the
       policy rules to that specific host where possible.

       The merging process is performed as follows:

       Each input file is parsed into internal sudoers data
          structures.

       Aliases are merged and renamed as necessary to avoid
          conflicts.  In the event of a conflict, the first alias found
          is left as-is and subsequent aliases of the same name are
          renamed with a numeric suffix separated with a underscore
          (‘_’).  For example, if there are two different aliases named
          SERVERS, the first will be left as-is and the second will be
          renamed SERVERS_1.  References to the renamed alias are also
          updated in the policy file.  Duplicate aliases (those with
          identical contents) are pruned.

       Defaults settings are merged and duplicates are removed.  If
          there are conflicts in the Defaults settings, a warning is
          emitted for each conflict.  If a host name is specified with
          the input file, cvtsudoers will change the global Defaults
          settings in that file to be host-specific.  A warning is
          emitted for command, user, or runas-specific Defaults settings
          which cannot be made host-specific.

       Per-user rules are merged and duplicates are removed.  If a
          host name is specified with the input file, cvtsudoers will
          change rules that specify a host name of ALL to the host name
          associated with the policy file being merged.  The merging of
          rules is currently fairly simplistic but will be improved in a
          later release.

       It is possible to merge policy files with differing formats.

   The cvtsudoers.conf file
       Options in the form “keyword = value” may also be specified in a
       configuration file, /etc/cvtsudoers.conf by default.  The
       following keywords are recognized:

       defaults = deftypes
             See the description of the -d command line option.

       expand_aliases = yes | no
             See the description of the -e command line option.

       group_file = file
             See the description of the --group-file command line
             option.

       input_format = ldif | sudoers
             See the description of the -i command line option.

       match = filter
             See the description of the -m command line option.

       match_local = yes | no
             See the description of the -M command line option.

       order_increment = increment
             See the description of the -I command line option.

       order_start = start_point
             See the description of the -O command line option.

       output_format = csv | json | ldif | sudoers
             See the description of the -f command line option.

       padding = padding
             See the description of the -P command line option.

       passwd_file = file
             See the description of the --passwd-file command line
             option.

       prune_matches = yes | no
             See the description of the -p command line option.

       sudoers_base = dn
             See the description of the -b command line option.

       suppress = sections
             See the description of the -s command line option.

       Options on the command line will override values from the
       configuration file.

   JSON output format
       The sudoers JSON format may contain any of the following top-
       level objects:

       Defaults
             An array of objects, each containing an Options array and
             an optional Binding array.

             The Options array consists of one or more objects, each
             containing a “name:value” pair that corresponds to a
             sudoers Defaults setting.  Options that operate on a list
             will also include an operation entry in the object, with a
             value of “list_assign” for ‘=’, “list_add” for ‘+=’, or
             “list_remove” for ‘-=’.

             The optional Binding array consists of one or more objects,
             each containing a “name:value” pair and an optional negated
             entry, which will negate any comparison performed with the
             object.  If a Binding is present, the setting will only
             take effect if one of the specified command, hostname,
             netgroup, networkaddr, nonunixgid, nonunixgroup, usergid,
             usergroup, userid, username, or alias entries match.

             For example, the following sudoers entry:

             Defaults@somehost set_home, env_keep += DISPLAY

             converts to:

             "Defaults": [
                 {
                     "Binding": [
                         { "hostname": "somehost" }
                     ],
                     "Options": [
                         { "set_home": true },
                         {
                             "operation": "list_add",
                             "env_keep": [
                                 "DISPLAY"
                             ]
                         }
                     ]
                 }
             ]

       User_Aliases
             A JSON object containing one or more sudoers User_Alias
             entries where each named alias has as its value an array
             containing one or more objects.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be one of netgroup, nonunixgid, nonunixgroup,
             useralias, usergid, usergroup, userid, or username.

             For example, the following sudoers entry:

             User_Alias SYSADMIN = will, %wheel, +admin

             converts to:

             "User_Aliases": {
                 "SYSADMIN": [
                     { "username": "will" },
                     { "usergroup": "wheel" },
                     { "netgroup": "admin" }
                 ]
             }

       Runas_Aliases
             A JSON object containing one or more sudoers Runas_Alias
             entries, where each named alias has as its value an array
             containing one or more objects.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be one of netgroup, nonunixgid, nonunixgroup,
             runasalias, usergid, usergroup, userid, or username.

             For example, the following sudoers entry:

             Runas_Alias DB = oracle, sybase : OP = root, operator

             converts to:

             "Runas_Aliases": {
                 "DB": [
                     { "username": "oracle" },
                     { "username": "sybase" }
                 ],
                 "OP": [
                     { "username": "root" },
                     { "username": "operator" }
                 ]
             }

       Host_Aliases
             A JSON object containing one or more sudoers Host_Alias
             entries where each named alias has as its value an array
             containing one or more objects.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be one of hostalias, hostname, netgroup, or
             networkaddr.

             For example, the following sudoers entries:

             Host_Alias DORMNET = 128.138.243.0, 128.138.204.0/24
             Host_Alias SERVERS = boulder, refuge

             convert to:

             "Host_Aliases": {
                 "DORMNET": [
                     { "networkaddr": "128.138.243.0" },
                     { "networkaddr": "128.138.204.0/24" }
                 ],
                 "SERVERS": [
                     { "hostname": "boulder" },
                     { "hostname": "refuge" }
                 ]
             }

       Cmnd_Aliases
             A JSON object containing one or more sudoers Cmnd_Alias
             entries where each named alias has as its value an array
             containing one or more objects.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be either another cmndalias or a command.  For example,
             the following sudoers entries:

             Cmnd_Alias SHELLS = /bin/bash, /bin/csh, /bin/sh, /bin/zsh
             Cmnd_Alias VIPW = /usr/bin/chpass, /usr/bin/chfn, /usr/bin/chsh, \
                               /usr/bin/passwd, /usr/sbin/vigr, /usr/sbin/vipw

             convert to:

             "Cmnd_Aliases": {
                 "SHELLS": [
                     { "command": "/bin/bash" },
                     { "command": "/bin/csh" },
                     { "command": "/bin/sh" },
                     { "command": "/bin/zsh" }
                 ],
                 "VIPW": [
                     { "command": "/usr/bin/chpass" },
                     { "command": "/usr/bin/chfn" },
                     { "command": "/usr/bin/chsh" },
                     { "command": "/usr/bin/passwd" },
                     { "command": "/usr/sbin/vigr" },
                     { "command": "/usr/sbin/vipw" }
                 ]
             }

       User_Specs
             A JSON array containing one or more objects, each
             representing a sudoers User_Spec.  Each object in the
             User_Specs array should contain a User_List array, a
             Host_List array and a Cmnd_Specs array.

             A User_List consists of one or more objects.  Each object
             contains a “name:value” pair and an optional negated entry,
             which will negate any comparison performed with the object.
             The name may be one of netgroup, nonunixgid, nonunixgroup,
             useralias, usergid, usergroup, userid, or username.  If
             username is set to the special value ALL, it will match any
             user.

             A Host_List consists of one or more objects.  Each object
             contains a “name:value” pair and an optional negated entry,
             which will negate any comparison performed with the object.
             The name may be one of hostalias, hostname, netgroup, or
             networkaddr.  If hostname is set to the special value ALL,
             it will match any host.

             The Cmnd_Specs array consists of one or more JSON objects
             describing a command that may be run.  Each Cmnd_Specs is
             made up of a Commands array, an optional runasusers array,
             an optional runasgroups array, and an optional Options
             array.

             The Commands array consists of one or more objects
             containing “name:value” pair elements.  The following names
             and values are supported:

             command  A string containing the command to run.  The
                      special value ALL it will match any command.

             negated  A boolean value that, if true, will negate any
                      comparison performed with the object.

             sha224   One or more SHA224 digests for the command in
                      string form.  Multiple digests of the same type
                      are stored as an array.

             sha256   One or more SHA256 digests for the command in
                      string form.  Multiple digests of the same type
                      are stored as an array.

             sha384   One or more SHA384 digests for the command in
                      string form.  Multiple digests of the same type
                      are stored as an array.

             sha512   One or more SHA512 digests for the command in
                      string form.  Multiple digests of the same type
                      are stored as an array.

             The runasusers array consists of objects describing users
             the command may be run as.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be one of netgroup, nonunixgid, nonunixgroup,
             runasalias, usergid, usergroup, userid, or username.  If
             username is set to the special value ALL, it will match any
             user.  If username is set to the empty string “”, it will
             match the invoking user.

             The runasgroups array consists of objects describing groups
             the command may be run as.  Each object contains a
             “name:value” pair and an optional negated entry, which will
             negate any comparison performed with the object.  The name
             may be one of runasalias, usergid, or usergroup.  If
             usergroup is set to the special value ALL, it will match
             any group.

             The Options array is of the same format as the one in the
             Defaults object.  Any Tag_Spec entries in sudoers are
             converted to Options.  A user with “sudo ALL” privileges
             will automatically have the setenv option enabled to match
             the implicit behavior provided by sudoers.

             For example, the following sudoers entry:

             millert ALL = (ALL : ALL) NOPASSWD: ALL, !/usr/bin/id

             converts to:

             "User_Specs": [
                 {
                     "User_List": [
                         { "username": "millert" }
                     ],
                     "Host_List": [
                         { "hostname": "ALL" }
                     ],
                     "Cmnd_Specs": [
                         {
                             "runasusers": [
                                 { "username": "ALL" }
                             ],
                             "runasgroups": [
                                 { "usergroup": "ALL" }
                             ],
                             "Options": [
                                 { "authenticate": false },
                                 { "setenv": true }
                             ],
                             "Commands": [
                                 { "command": "ALL" },
                                 {
                                     "command": "/usr/bin/id",
                                     "negated": true
                                 }
                             ]
                         }
                     ]
                 }
             ]

   CSV output format
       CSV (comma-separated value) files are often used by spreadsheets
       and report generators.  For CSV output, cvtsudoers double quotes
       strings that contain commas.  For each literal double quote
       character present inside the string, two double quotes are
       output.  This method of quoting commas is compatible with most
       spreadsheet programs.

       There are three possible sections in cvtsudoers's CSV output,
       each separated by a blank line:

       defaults
             This section includes any Defaults settings in sudoers.
             The defaults section begins with the following heading:

                   defaults_type,binding,name,operator,value

             The fields are as follows:

             defaults_type
                   The type of Defaults setting; one of defaults,
                   defaults_command, defaults_host, defaults_runas, or
                   defaults_user.

             binding
                   For defaults_command, defaults_host, defaults_runas,
                   and defaults_user this is the value that must match
                   for the setting to be applied.

             name  The name of the Defaults setting.

             operator
                   The operator determines how the value is applied to
                   the setting.  It may be either ‘=’ (assignment), ‘+=’
                   (append), or ‘-=’ (remove).

             value
                   The setting's value, usually a string or, for
                   settings used in a boolean context, true or false.

       aliases
             This section includes any Cmnd_Alias Host_Alias,
             Runas_Alias, or User_Alias, entries from sudoers.  The
             aliases section begins with the following heading:

                   alias_type,alias_name,members

             The fields are as follows:

             alias_type
                   The type of alias; one of Cmnd_Alias, Host_Alias,
                   Runas_Alias, or User_Alias.

             alias_name
                   The name of the alias; a string starting with an
                   upper-case letter that consists of upper-case
                   letters, digits, or underscores.

             members
                   A comma-separated list of members belonging to the
                   alias.  Due to the use of commas, members is
                   surrounded by double quotes if it contains more than
                   one member.

       rules
             This section includes the sudoers rules that grant
             privileges.  The rules section begins with the following
             heading:

                   rule,user,host,runusers,rungroups,options,command

             The fields are as follows:

             rule  This field indicates a sudoers rule entry.

             user  The user the rule applies to.  This may also be a
                   Unix group (preceded by a ‘%’ character), a non-Unix
                   group (preceded by ‘%:’) or a netgroup (preceded by a
                   ‘+’ character) or a User_Alias.  If set to the
                   special value ALL, it will match any user.

             host  The host the rule applies to.  This may also be a
                   netgroup (preceded by a ‘+’ character) or a
                   Host_Alias.  If set to the special value ALL, it will
                   match any host.

             runusers
                   An optional comma-separated list of users (or
                   Runas_Aliases) the command may be run as.  If it
                   contains more than one member, the value is
                   surrounded by double quotes.  If set to the special
                   value ALL, it will match any user.  If empty, the
                   root user is assumed.

             rungroups
                   An optional comma-separated list of groups (or
                   Runas_Aliases) the command may be run as.  If it
                   contains more than one member, the value is
                   surrounded by double quotes.  If set to the special
                   value ALL, it will match any group.  If empty, the
                   runuser's group is used.

             options
                   An optional list of Defaults settings to apply to the
                   command.  Any Tag_Spec entries in sudoers are
                   converted to options.

             commands
                   A list of commands, with optional arguments, that the
                   user is allowed to run.  If set to the special value
                   ALL, it will match any command.

             For example, the following sudoers entry:

             millert ALL = (ALL : ALL) NOPASSWD: ALL, !/usr/bin/id

             converts to:

             rule,millert,ALL,ALL,ALL,"!authenticate","ALL,!/usr/bin/id"

FILES         top

       /etc/cvtsudoers.conf      default configuration for cvtsudoers

EXAMPLES         top

       Convert /etc/sudoers to LDIF (LDAP Data Interchange Format) where
       the ldap.conf file uses a sudoers_base of my-domain,dc=com,
       storing the result in sudoers.ldif:

           $ cvtsudoers -b ou=SUDOers,dc=my-domain,dc=com -o sudoers.ldif \
                        /etc/sudoers

       Convert /etc/sudoers to JSON format, storing the result in
       sudoers.json:

           $ cvtsudoers -f json -o sudoers.json /etc/sudoers

       Parse /etc/sudoers and display only rules that match user ambrose
       on host hastur:

           $ cvtsudoers -f sudoers -m user=ambrose,host=hastur /etc/sudoers

       Same as above, but expand aliases and prune out any non-matching
       users and hosts from the expanded entries.

           $ cvtsudoers -ep -f sudoers -m user=ambrose,host=hastur /etc/sudoers

       Convert sudoers.ldif from LDIF to traditional sudoers format:

           $ cvtsudoers -i ldif -f sudoers -o sudoers.new sudoers.ldif

       Merge a global sudoers file with two host-specific policy files
       from the hosts “xyzzy” and “plugh”:

           $ cvtsudoers -f sudoers -o sudoers.merged sudoers \
               xyzzy:sudoers.xyzzy plugh:sudoers.plugh

SEE ALSO         top

       sudoers(5), sudoers.ldap(5), sudo(8)

AUTHORS         top

       Many people have worked on sudo over the years; this version
       consists of code written primarily by:

             Todd C. Miller

       See the CONTRIBUTORS.md file in the sudo distribution
       (https://www.sudo.ws/about/contributors/) for an exhaustive list
       of people who have contributed to sudo.

BUGS         top

       If you believe you have found a bug in cvtsudoers, you can either
       file a bug report in the sudo bug database,
       https://bugzilla.sudo.ws/, or open an issue at
       https://github.com/sudo-project/sudo/issues.  If you would prefer
       to use email, messages may be sent to the sudo-workers mailing
       list, https://www.sudo.ws/mailman/listinfo/sudo-workers (public)
       or <[email protected]> (private).

       Please not report security vulnerabilities through public GitHub
       issues, Bugzilla or mailing lists.  Instead, report them via
       email to <[email protected]>.  You may encrypt your message
       with PGP if you would like, using the key found at
       https://www.sudo.ws/dist/PGPKEYS.

SUPPORT         top

       Limited free support is available via the sudo-users mailing
       list, see https://www.sudo.ws/mailman/listinfo/sudo-users to
       subscribe or search the archives.

DISCLAIMER         top

       cvtsudoers is provided “AS IS” and any express or implied
       warranties, including, but not limited to, the implied warranties
       of merchantability and fitness for a particular purpose are
       disclaimed.  See the LICENSE.md file distributed with sudo or
       https://www.sudo.ws/about/license/ for complete details.

COLOPHON         top

       This page is part of the sudo (execute a command as another user)
       project.  Information about the project can be found at
       https://www.sudo.ws/.  If you have a bug report for this manual
       page, see ⟨https://bugzilla.sudo.ws/⟩.  This page was obtained
       from the project's upstream Git repository
       ⟨https://github.com/sudo-project/sudo⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2024-06-08.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

Sudo 1.9.16                  April 26, 2024                CVTSUDOERS(1)