ibv_create_flow(3) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | NOTES | EXAMPLE | AUTHORS | COLOPHON

IBV_CREATE_FLOW(3)   Libibverbs Programmer's Manual   IBV_CREATE_FLOW(3)

NAME         top

       ibv_create_flow, ibv_destroy_flow - create or destroy flow
       steering rules

SYNOPSIS         top

       #include <infiniband/verbs.h>

       struct ibv_flow *ibv_create_flow(struct ibv_qp *qp,
                                        struct ibv_flow_attr *flow_attr);
       int ibv_destroy_flow(struct ibv_flow *flow_id);

DESCRIPTION         top

   ibv_create_flow()
       allows a user application QP qp to be attached into a specified
       flow flow which is defined in <infiniband/verbs.h>

       struct ibv_flow_attr {
               uint32_t comp_mask;                     /* Future extendibility */
               enum ibv_flow_attr_type type;           /* Rule type - see below */
               uint16_t size;                          /* Size of command */
               uint16_t priority;                      /* Rule priority - see below */
               uint8_t num_of_specs;                   /* Number of ibv_flow_spec_xxx */
               uint8_t port;                           /* The uplink port number */
               uint32_t flags;                         /* Extra flags for rule - see below */
               /* Following are the optional layers according to user request
                * struct ibv_flow_spec_xxx
                * struct ibv_flow_spec_yyy
                */
       };

       enum ibv_flow_attr_type {
               IBV_FLOW_ATTR_NORMAL          = 0x0,         /* Steering according to rule specifications */
               IBV_FLOW_ATTR_ALL_DEFAULT     = 0x1,         /* Default unicast and multicast rule - receive all Eth traffic which isn't steered to any QP */
               IBV_FLOW_ATTR_MC_DEFAULT      = 0x2,         /* Default multicast rule - receive all Eth multicast traffic which isn't steered to any QP */
               IBV_FLOW_ATTR_SNIFFER         = 0x3,         /* Sniffer rule - receive all port traffic */
       };

       enum ibv_flow_flags {
               IBV_FLOW_ATTR_FLAGS_DONT_TRAP       = 1 << 1,     /* Rule doesn't trap received packets, allowing them to match lower prioritized rules */
               IBV_FLOW_ATTR_FLAGS_EGRESS          = 1 << 2,     /* Match sent packets against EGRESS rules and carry associated actions if required */
       };

       enum ibv_flow_spec_type {
               IBV_FLOW_SPEC_ETH                       = 0x20,   /* Flow specification of L2 header */
               IBV_FLOW_SPEC_IPV4                      = 0x30,   /* Flow specification of IPv4 header */
               IBV_FLOW_SPEC_IPV6                      = 0x31,   /* Flow specification of IPv6 header */
               IBV_FLOW_SPEC_IPV4_EXT                  = 0x32,   /* Extended flow specification of IPv4 */
               IBV_FLOW_SPEC_ESP                       = 0x34,   /* Flow specification of ESP (IPSec) header */
               IBV_FLOW_SPEC_TCP                       = 0x40,   /* Flow specification of TCP header */
               IBV_FLOW_SPEC_UDP                       = 0x41,   /* Flow specification of UDP header */
               IBV_FLOW_SPEC_VXLAN_TUNNEL              = 0x50,   /* Flow specification of VXLAN header */
               IBV_FLOW_SPEC_GRE                       = 0x51,   /* Flow specification of GRE header */
               IBV_FLOW_SPEC_MPLS                      = 0x60,   /* Flow specification of MPLS header */
               IBV_FLOW_SPEC_INNER                     = 0x100,  /* Flag making L2/L3/L4 specifications to be applied on the inner header */
               IBV_FLOW_SPEC_ACTION_TAG                = 0x1000, /* Action tagging matched packet */
               IBV_FLOW_SPEC_ACTION_DROP               = 0x1001, /* Action dropping matched packet */
               IBV_FLOW_SPEC_ACTION_HANDLE             = 0x1002, /* Carry out an action created by ibv_create_flow_action_xxxx verb */
               IBV_FLOW_SPEC_ACTION_COUNT              = 0x1003, /* Action count matched packet with a ibv_counters handle */
       };

       Flow specification general structure:
       struct ibv_flow_spec_xxx {
               enum ibv_flow_spec_type  type;
               uint16_t  size;                  /* Flow specification size = sizeof(struct ibv_flow_spec_xxx) */
               struct ibv_flow_xxx_filter val;
               struct ibv_flow_xxx_filter mask; /* Defines which bits from the filter value are applicable when looking for a match in the incoming packet */
       };

       Each spec struct holds the relevant network layer parameters for matching. To enforce the match, the user sets a mask for each parameter.
       Packets coming from the wire are matched against the flow specification. If a match is found, the associated flow actions are executed on the packet.
       In ingress flows, the QP parameter is treated as another action of scattering the packet to the respected QP.
       If the bit is set in the mask, the corresponding bit in the value should be matched.
       Note that most vendors support either full mask (all "1"s) or zero mask (all "0"s).
       Network parameters in the relevant network structs should be given in network order (big endian).

   Flow domains and priority
       Flow steering defines the concept of domain and priority. Each
       domain represents an application that can attach a flow.  Domains
       are prioritized. A higher priority domain will always supersede a
       lower priority domain when their flow specifications overlap.
       IB verbs have the higher priority domain.
       In addition to the domain, there is priority within each of the
       domains.  A lower priority numeric value (higher priority) takes
       precedence over matching rules with higher numeric priority value
       (lower priority).  It is important to note that the priority
       value of a flow spec is used not only to establish the precedence
       of conflicting flow matches but also as a way to abstract the
       order on which flow specs are tested for matches. Flows with
       higher priorities will be tested before flows with lower
       priorities.

   Rules definition ordering
       An application can provide the ibv_flow_spec_xxx rules in an un-
       ordered scheme. In this case, each spec should be well defined
       and match a specific network header layer.  In some cases, when
       certain flow spec types are present in the spec list, it is
       required to provide the list in an ordered manner so that the
       position of that flow spec type in the protocol stack is strictly
       defined.  When the certain spec type, which requires the
       ordering, resides in the inner network protocol stack (in tunnel
       protocols) the ordering should be applied to the inner network
       specs and should be combined with the inner spec indication using
       the IBV_FLOW_SPEC_INNER flag.  For example: An MPLS spec which
       attempts to match an MPLS tag in the inner network should have
       the IBV_FLOW_SPEC_INNER flag set and so do the rest of the inner
       network specs. On top of that, all the inner network specs should
       be provided in an ordered manner.  This is essential to represent
       many of the encapsulation tunnel protocols.

       The flow spec types which require this sort of ordering are:
       1. IBV_FLOW_SPEC_MPLS -
       Since MPLS header can appear at several locations in the protocol
       stack and can also be encapsulated on top of different layers, it
       is required to place this spec according to its exact location in
       the protocol stack.

   ibv_destroy_flow()
       destroys the flow flow_id.

RETURN VALUE         top

       ibv_create_flow() returns a pointer to the flow, or NULL if the
       request fails. In case of an error, errno is updated.

       ibv_destroy_flow() returns 0 on success, or the value of errno on
       failure (which indicates the failure reason).

ERRORS         top

   EINVAL
       ibv_create_flow() flow specification, QP or priority are invalid

       ibv_destroy_flow() flow_id is invalid

   ENOMEM
       Couldn't create/destroy flow, not enough memory

   ENXIO
       Device managed flow steering isn't currently supported

   EPERM
       No permissions to add the flow steering rule

NOTES         top

       1. These verbs are available only for devices supporting
          IBV_DEVICE_MANAGED_FLOW_STEERING and only for QPs of Transport
       Service Type IBV_QPT_UD or IBV_QPT_RAW_PACKET
       2. User must memset the spec struct with zeros before using it.
       3. ether_type field in ibv_flow_eth_filter is the ethertype
       following the last VLAN tag of the packet.
       4. Only rule type IBV_FLOW_ATTR_NORMAL supports
       IBV_FLOW_ATTR_FLAGS_DONT_TRAP flag.
       5. No specifications are needed for IBV_FLOW_ATTR_SNIFFER rule
       type.
       6. When IBV_FLOW_ATTR_FLAGS_EGRESS flag is set, the qp parameter
       is used only as a mean to get the device.

EXAMPLE         top

       Below flow_attr defines a rule in priority 0 to match a
       destination mac address and a source ipv4 address. For that, L2
       and L3 specs are used.
       If there is a hit on this rule, means the received packet has
       destination mac: 66:11:22:33:44:55 and source ip: 0x0B86C806, the
       packet is steered to its attached qp.

       struct raw_eth_flow_attr {
               struct ibv_flow_attr            attr;
               struct ibv_flow_spec_eth        spec_eth;
               struct ibv_flow_spec_ipv4       spec_ipv4;
       } __attribute__((packed));

       struct raw_eth_flow_attr flow_attr = {
                       .attr = {
                               .comp_mask      = 0,
                               .type           = IBV_FLOW_ATTR_NORMAL,
                               .size           = sizeof(flow_attr),
                               .priority       = 0,
                               .num_of_specs   = 2,
                               .port           = 1,
                               .flags          = 0,
                       },
                       .spec_eth = {
                               .type   = IBV_FLOW_SPEC_ETH,
                               .size   = sizeof(struct ibv_flow_spec_eth),
                               .val = {
                                       .dst_mac = {0x66, 0x11, 0x22, 0x33, 0x44, 0x55},
                                       .src_mac = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
                                       .ether_type = 0,
                                       .vlan_tag = 0,
                               },
                               .mask = {
                                       .dst_mac = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                                       .src_mac = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                                       .ether_type = 0,
                                       .vlan_tag = 0,
                               }
                       },
                       .spec_ipv4 = {
                               .type   = IBV_FLOW_SPEC_IPV4,
                               .size   = sizeof(struct ibv_flow_spec_ipv4),
                               .val = {
                                       .src_ip = 0x0B86C806,
                                       .dst_ip = 0,
                               },
                               .mask = {
                                       .src_ip = 0xFFFFFFFF,
                                       .dst_ip = 0,
                               }
                       }
       };

AUTHORS         top

       Hadar Hen Zion <[email protected]>

       Matan Barak <[email protected]>

       Yishai Hadas <[email protected]>

       Maor Gottlieb <[email protected]>

COLOPHON         top

       This page is part of the rdma-core (RDMA Core Userspace Libraries
       and Daemons) project.  Information about the project can be found
       at ⟨https://github.com/linux-rdma/rdma-core⟩.  If you have a bug
       report for this manual page, send it to
       [email protected].  This page was obtained from the
       project's upstream Git repository
       ⟨https://github.com/linux-rdma/rdma-core.git⟩ on 2024-06-14.  (At
       that time, the date of the most recent commit that was found in
       the repository was 2024-06-10.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

libibverbs                     2016-03-15             IBV_CREATE_FLOW(3)