tc-bfifo(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | ALGORITHM | PARAMETERS | OUTPUT | SEE ALSO | AUTHORS | COLOPHON

PBFIFO(8)                         Linux                        PBFIFO(8)

NAME         top

       pfifo - Packet limited First In, First Out queue

       bfifo - Byte limited First In, First Out queue

SYNOPSIS         top

       tc qdisc ... add pfifo [ limit packets ]

       tc qdisc ... add bfifo [ limit bytes ]

DESCRIPTION         top

       The pfifo and bfifo qdiscs are unadorned First In, First Out
       queues. They are the simplest queues possible and therefore have
       no overhead.  pfifo constrains the queue size as measured in
       packets.  bfifo does so as measured in bytes.

       Like all non-default qdiscs, they maintain statistics. This might
       be a reason to prefer pfifo or bfifo over the default.

ALGORITHM         top

       A list of packets is maintained, when a packet is enqueued it
       gets inserted at the tail of a list. When a packet needs to be
       sent out to the network, it is taken from the head of the list.

       If the list is too long, no further packets are allowed on. This
       is called 'tail drop'.

PARAMETERS         top

       limit  Maximum queue size. Specified in bytes for bfifo, in
              packets for pfifo. For pfifo, defaults to the interface
              txqueuelen, as specified with ip(8).  The range for this
              parameter is [0, UINT32_MAX].

              For bfifo, it defaults to the txqueuelen multiplied by the
              interface MTU.  The range for this parameter is [0,
              UINT32_MAX] bytes.

              Note: The link layer header was considered when counting
              packets length.

OUTPUT         top

       The output of tc -s qdisc ls contains the limit, either in
       packets or in bytes, and the number of bytes and packets actually
       sent. An unsent and dropped packet only appears between braces
       and is not counted as 'Sent'.

       In this example, the queue length is 100 packets, 45894 bytes
       were sent over 681 packets.  No packets were dropped, and as the
       pfifo queue does not slow down packets, there were also no
       overlimits:

       # tc -s qdisc ls dev eth0
       qdisc pfifo 8001: dev eth0 limit 100p
        Sent 45894 bytes 681 pkts (dropped 0, overlimits 0)

       If a backlog occurs, this is displayed as well.

SEE ALSO         top

       tc(8)

AUTHORS         top

       Alexey N. Kuznetsov, <[email protected]>

       This manpage maintained by bert hubert <[email protected]>

COLOPHON         top

       This page is part of the iproute2 (utilities for controlling
       TCP/IP networking and traffic) project.  Information about the
       project can be found at 
       ⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
       If you have a bug report for this manual page, send it to
       [email protected], [email protected].  This page was
       obtained from the project's upstream Git repository
       ⟨https://git.kernel.org/pub/scm/network/iproute2/iproute2.git⟩ on
       2024-06-14.  (At that time, the date of the most recent commit
       that was found in the repository was 2024-06-11.)  If you
       discover any rendering problems in this HTML version of the page,
       or you believe there is a better or more up-to-date source for
       the page, or you have corrections or improvements to the
       information in this COLOPHON (which is not part of the original
       manual page), send a mail to [email protected]

iproute2                     10 January 2002                   PBFIFO(8)

Pages that refer to this page: tc(8)tc-htb(8)tc-pfifo_fast(8)