systemd-coredump(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | CONFIGURATION | INFORMATION ABOUT THE CRASHED PROCESS | SEE ALSO | NOTES | COLOPHON

SYSTEMD-COREDUMP(8)         systemd-coredump         SYSTEMD-COREDUMP(8)

NAME         top

       systemd-coredump, systemd-coredump.socket, systemd-
       [email protected] - Acquire, save and process core dumps

SYNOPSIS         top

       /usr/lib/systemd/systemd-coredump

       /usr/lib/systemd/systemd-coredump --backtrace

       [email protected]

       systemd-coredump.socket

DESCRIPTION         top

       [email protected] is a system service to process core
       dumps. It will log a summary of the event to
       systemd-journald.service(8), including information about the
       process identifier, owner, the signal that killed the process,
       and the stack trace if possible. It may also save the core dump
       for later processing. See the "Information about the crashed
       process" section below.

       The behavior of a specific program upon reception of a signal is
       governed by a few factors which are described in detail in
       core(5). In particular, the core dump will only be processed when
       the related resource limits are sufficient.

       Core dumps can be written to the journal or saved as a file. In
       both cases, they can be retrieved for further processing, for
       example in gdb(1). See coredumpctl(1), in particular the list and
       debug verbs.

       By default, systemd-coredump will log the core dump to the
       journal, including a backtrace if possible, and store the core
       dump (an image of the memory contents of the process) itself in
       an external file in /var/lib/systemd/coredump. These core dumps
       are deleted after a few days by default; see
       /usr/lib/tmpfiles.d/systemd.conf for details. Note that the
       removal of core files from the file system and the purging of
       journal entries are independent, and the core file may be present
       without the journal entry, and journal entries may point to
       since-removed core files. Some metadata is attached to core files
       in the form of extended attributes, so the core files are useful
       for some purposes even without the full metadata available in the
       journal entry.

       For further details see systemd Coredump Handling[1].

   Invocation of systemd-coredump
       The systemd-coredump executable does the actual work. It is
       invoked twice: once as the handler by the kernel, and the second
       time in the [email protected] to actually write the data
       to the journal and process and save the core file.

       When the kernel invokes systemd-coredump to handle a core dump,
       it runs in privileged mode, and will connect to the socket
       created by the systemd-coredump.socket unit, which in turn will
       spawn an unprivileged [email protected] instance to
       process the core dump. Hence systemd-coredump.socket and
       [email protected] are helper units which do the actual
       processing of core dumps and are subject to normal service
       management.

       It is also possible to invoke systemd-coredump with --backtrace
       option. In this case, systemd-coredump expects a journal entry in
       the journal Journal Export Format[2] on standard input. The entry
       should contain a MESSAGE= field and any additional metadata
       fields the caller deems reasonable.  systemd-coredump will append
       additional metadata fields in the same way it does for core dumps
       received from the kernel. In this mode, no core dump is stored in
       the journal.

CONFIGURATION         top

       For programs started by systemd, process resource limits can be
       set by directive LimitCORE=, see systemd.exec(5).

       In order to be used by the kernel to handle core dumps,
       systemd-coredump must be configured in sysctl(8) parameter
       kernel.core_pattern. The syntax of this parameter is explained in
       core(5). systemd installs the file
       /usr/lib/sysctl.d/50-coredump.conf which configures
       kernel.core_pattern accordingly. This file may be masked or
       overridden to use a different setting following normal
       sysctl.d(5) rules. If the sysctl configuration is modified, it
       must be updated in the kernel before it takes effect, see
       sysctl(8) and systemd-sysctl(8).

       In order to be used in the --backtrace mode, an appropriate
       backtrace handler must be installed on the sender side. For
       example, in case of python(1), this means a sys.excepthook must
       be installed, see systemd-coredump-python[3].

       The behavior of systemd-coredump itself is configured through the
       configuration file /etc/systemd/coredump.conf and corresponding
       snippets /etc/systemd/coredump.conf.d/*.conf, see
       coredump.conf(5). A new instance of systemd-coredump is invoked
       upon receiving every core dump. Therefore, changes in these files
       will take effect the next time a core dump is received.

       Resources used by core dump files are restricted in two ways.
       Parameters like maximum size of acquired core dumps and files can
       be set in files /etc/systemd/coredump.conf and snippets mentioned
       above. In addition the storage time of core dump files is
       restricted by systemd-tmpfiles, corresponding settings are by
       default in /usr/lib/tmpfiles.d/systemd.conf. The default is to
       delete core dumps after a few days; see the above file for
       details.

   Disabling coredump processing
       To disable potentially resource-intensive processing by
       systemd-coredump, set

           Storage=none
           ProcessSizeMax=0

       in coredump.conf(5).

INFORMATION ABOUT THE CRASHED PROCESS         top

       coredumpctl(1) can be used to retrieve saved core dumps
       independently of their location, to display information, and to
       process them e.g. by passing to the GNU debugger (gdb).

       Data stored in the journal can be also viewed with journalctl(1)
       as usual (or from any other process, using the sd-journal(3)
       API). The relevant messages have
       MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1:

           $ journalctl MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1 -o verbose
           ...
           MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1
           COREDUMP_PID=552351
           COREDUMP_UID=1000
           COREDUMP_GID=1000
           COREDUMP_SIGNAL_NAME=SIGSEGV
           COREDUMP_SIGNAL=11
           COREDUMP_TIMESTAMP=1614342930000000
           COREDUMP_COMM=Web Content
           COREDUMP_EXE=/usr/lib64/firefox/firefox
           COREDUMP_USER_UNIT=app-gnome-firefox-552136.scope
           COREDUMP_CMDLINE=/usr/lib64/firefox/firefox -contentproc -childID 5 -isForBrowser ...
           COREDUMP_CGROUP=/user.slice/user-1000.slice/[email protected]/app.slice/app-....scope
           COREDUMP_FILENAME=/var/lib/systemd/coredump/core.Web....552351.....zst
           ...

       The following fields are saved (if known) with the journal entry

       COREDUMP_UID=, COREDUMP_PID=, COREDUMP_GID=
           The process number (PID), owner user number (UID), and group
           number (GID) of the crashed process.

           When the crashed process was part of a container (or in a
           process or user namespace in general), those are the values
           as seen outside, in the namespace where systemd-coredump is
           running.

           Added in version 248.

       COREDUMP_TIMESTAMP=
           The time of the crash as reported by the kernel (in μs since
           the epoch).

           Added in version 248.

       COREDUMP_RLIMIT=
           The core file size soft resource limit, see getrlimit(2).

           Added in version 248.

       COREDUMP_UNIT=, COREDUMP_SLICE=
           The system unit and slice names.

           When the crashed process was in container, those are the
           units names outside, in the main system manager.

           Added in version 248.

       COREDUMP_CGROUP=
           The primary cgroup of the unit of the crashed process.

           When the crashed process was in a container, this is the full
           path, as seen outside of the container.

           Added in version 248.

       COREDUMP_PROC_CGROUP=
           Control group information in the format used in
           /proc/self/cgroup. On systems with the unified cgroup
           hierarchy, this is a single path prefixed with "0::", and
           multiple paths prefixed with controller numbers on legacy
           systems.

           When the crashed process was in a container, this is the full
           path, as seen outside of the container.

           Added in version 248.

       COREDUMP_OWNER_UID=, COREDUMP_USER_UNIT=, COREDUMP_SESSION=
           The numerical UID of the user owning the login session or
           systemd user unit of the crashed process, the user manager
           unit, and the session identifier. All three fields are only
           present for user processes.

           When the crashed process was in container, those are the
           values outside, in the main system.

           Added in version 248.

       COREDUMP_SIGNAL_NAME=, COREDUMP_SIGNAL=
           The terminating signal name (with the "SIG" prefix [4]) and
           numerical value. (Both are included because signal numbers
           vary by architecture.)

           Added in version 248.

       COREDUMP_CWD=, COREDUMP_ROOT=
           The current working directory and root directory of the
           crashed process.

           When the crashed process is in a container, those paths are
           relative to the root of the container's mount namespace.

           Added in version 248.

       COREDUMP_OPEN_FDS=
           Information about open file descriptors, in the following
           format:

               fd:/path/to/file
               pos:     ...
               flags:   ...
               ...

               fd:/path/to/file
               pos:     ...
               flags:   ...
               ...

           The first line contains the file descriptor number fd and the
           path, while subsequent lines show the contents of
           /proc/pid/fdinfo/fd.

           Added in version 248.

       COREDUMP_EXE=
           The destination of the /proc/pid/exe symlink.

           When the crashed process is in a container, that path is
           relative to the root of the container's mount namespace.

           Added in version 248.

       COREDUMP_CMDLINE=, COREDUMP_COMM=, COREDUMP_ENVIRON=,
       COREDUMP_PROC_AUXV=, COREDUMP_PROC_LIMITS=, COREDUMP_PROC_MAPS=,
       COREDUMP_PROC_MOUNTINFO=, COREDUMP_PROC_STATUS=
           Fields that map the per-process entries in the /proc/
           filesystem: /proc/pid/cmdline (the command line of the
           crashed process), /proc/pid/comm (the command name associated
           with the process), /proc/pid/environ (the environment block
           of the crashed process), /proc/pid/auxv (the auxiliary vector
           of the crashed process, see getauxval(3)), /proc/pid/limits
           (the soft and hard resource limits), /proc/pid/maps (memory
           regions visible to the process and their access permissions),
           /proc/pid/mountinfo (mount points in the process's mount
           namespace), /proc/pid/status (various metadata about the
           process).

           See proc(5) for more information.

           Added in version 248.

       COREDUMP_HOSTNAME=
           The system hostname.

           When the crashed process was in container, this is the
           container hostname.

           Added in version 248.

       COREDUMP_CONTAINER_CMDLINE=
           For processes running in a container, the command line of the
           process spawning the container (the first parent process with
           a different mount namespace).

           Added in version 248.

       COREDUMP=
           When the core is stored in the journal, the core image
           itself.

           Added in version 248.

       COREDUMP_FILENAME=
           When the core is stored externally, the path to the core
           file.

           Added in version 248.

       COREDUMP_TRUNCATED=
           Set to "1" when the saved coredump was truncated. (A partial
           core image may still be processed by some tools, though
           obviously not all information is available.)

           Added in version 248.

       COREDUMP_PACKAGE_NAME=, COREDUMP_PACKAGE_VERSION=,
       COREDUMP_PACKAGE_JSON=
           If the executable contained .package metadata ELF notes, they
           will be parsed and attached. The package and packageVersion
           of the 'main' ELF module (ie: the executable) will be
           appended individually. The JSON-formatted content of all
           modules will be appended as a single JSON object, each with
           the module name as the key. For more information about this
           metadata format and content, see the coredump metadata
           spec[5].

           Added in version 249.

       MESSAGE=
           The message generated by systemd-coredump that includes the
           backtrace if it was successfully generated. When
           systemd-coredump is invoked with --backtrace, this field is
           provided by the caller.

           Added in version 248.

       Various other fields exist in the journal entry, but pertain to
       the logging process, i.e.  systemd-coredump, not the crashed
       process. See systemd.journal-fields(7).

       The following fields are saved (if known) with the external file
       listed in COREDUMP_FILENAME= as extended attributes:

       user.coredump.pid, user.coredump.uid, user.coredump.gid,
       user.coredump.signal, user.coredump.timestamp,
       user.coredump.rlimit, user.coredump.hostname, user.coredump.comm,
       user.coredump.exe
           Those are the same as COREDUMP_PID=, COREDUMP_UID=,
           COREDUMP_GID=, COREDUMP_SIGNAL=, COREDUMP_TIMESTAMP=,
           COREDUMP_RLIMIT=, COREDUMP_HOSTNAME=, COREDUMP_COMM=, and
           COREDUMP_EXE=, described above.

           Added in version 248.

       Those can be viewed using getfattr(1). For the core file
       described in the journal entry shown above:

           $ getfattr --absolute-names -d /var/lib/systemd/coredump/core.Web....552351.....zst
           # file: /var/lib/systemd/coredump/core.Web....552351.....zst
           user.coredump.pid="552351"
           user.coredump.uid="1000"
           user.coredump.gid="1000"
           user.coredump.signal="11"
           user.coredump.timestamp="1614342930000000"
           user.coredump.comm="Web Content"
           user.coredump.exe="/usr/lib64/firefox/firefox"
           ...

SEE ALSO         top

       coredump.conf(5), coredumpctl(1), systemd-journald.service(8),
       systemd-tmpfiles(8), core(5), sysctl.d(5),
       systemd-sysctl.service(8), systemd Coredump Handling[1]

NOTES         top

        1. systemd Coredump Handling
           https://systemd.io/COREDUMP

        2. Journal Export Format
           https://systemd.io/JOURNAL_EXPORT_FORMATS#journal-export-format

        3. systemd-coredump-python
           https://github.com/systemd/systemd-coredump-python

        4. kill(1) expects signal names without the prefix; kill(2) uses
           the prefix; all systemd tools accept signal names both with
           and without the prefix.

        5. the coredump metadata spec
           https://systemd.io/COREDUMP_PACKAGE_METADATA/

COLOPHON         top

       This page is part of the systemd (systemd system and service
       manager) project.  Information about the project can be found at
       ⟨http://www.freedesktop.org/wiki/Software/systemd⟩.  If you have
       a bug report for this manual page, see
       ⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
       This page was obtained from the project's upstream Git repository
       ⟨https://github.com/systemd/systemd.git⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2024-06-13.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

systemd 257~devel                                    SYSTEMD-COREDUMP(8)

Pages that refer to this page: coredumpctl(1)core(5)coredump.conf(5)systemd.directives(7)systemd.index(7)systemd-journald.service(8)