pmrep(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | FILES | PCP ENVIRONMENT | SEE ALSO | COLOPHON

PMREP(1)                 General Commands Manual                PMREP(1)

NAME         top

       pmrep - performance metrics reporter

SYNOPSIS         top

       pmrep [-12357CdgGHIjkLmnprRuUvVxz?]  [-4 action] [-6 sort-metric]
       [-8|-9 limit] [-a archive] [-A align] [--archive-folio folio]
       [-b|-B space-scale] [-c config] [--container container]
       [--daemonize] [-e derived] [-E lines] [-f format] [-F outfile]
       [-h host] [-i instances] [--include-texts] [-J rank] [-K spec]
       [-l delimiter] [-N predicate] [--no-inst-info] [-o output] [-O
       origin] [-P|-0 precision] [-q|-Q count-scale] [-s samples] [-S
       starttime] [-t interval] [-T endtime] [-w|-W width] [-X label]
       [-y|-Y time-scale] [-Z timezone] metricspec [...]

DESCRIPTION         top

       pmrep is a customizable performance metrics reporting tool.  Any
       available performance metric, live or archived, system and/or
       application, can be selected for reporting using one of the
       output alternatives listed below together with applicable
       formatting options.

       pmrep collects selected metric values through the facilities of
       the Performance Co-Pilot (PCP), see PCPIntro(1).  The metrics to
       be reported are specified on the command line, in configuration
       files, or both.  Metrics can be automatically converted and
       scaled using the PCP facilities, either by default or by per-
       metric scaling specifications.  In addition to the existing
       metrics, derived metrics can be defined using the arithmetic
       expressions described in pmRegisterDerived(3).

       A wide range of metricsets (see below) is included by default,
       providing reports on per-process details, NUMA performance,
       mimicking other tools like sar(1) and more, see the pmrep
       configuration files in $PCP_SYSCONF_DIR/pmrep (typically
       /etc/pcp/pmrep) for details.  Tab completion for options,
       metrics, and metricsets is available for bash and zsh.

       Unless directed to another host by the -h option, pmrep will
       contact the Performance Metrics Collector Daemon (PMCD, see
       pmcd(1)) on the local host.

       The -a option causes pmrep to use the specified set of archives
       rather than connecting to a PMCD.  The -a and -h options are
       mutually exclusive.

       The -L option causes pmrep to use a local context to collect
       metrics from DSO PMDAs (Performance Metrics Domain Agents,
       ``plugins'') on the local host without PMCD.  Only some metrics
       are available in this mode.  The -a, -h, and -L options are
       mutually exclusive.

       The metrics of interest are named in the metricspec argument(s).
       If a metricspec specifies a non-leaf node in the Performance
       Metrics Name Space (PMNS), then pmrep will recursively descend
       the PMNS and report on all leaf nodes (i.e. metrics) for that
       metricspec.  Use pminfo(1) to list all the metrics (PMNS lead
       nodes) and their descriptions.

       A metricspec has three different forms.  First, on the command
       line it can start with a colon (``:'') to indicate a metricset to
       be read from pmrep configuration files (see -c and
       pmrep.conf(5)), which may then consist of any number of metrics.
       Second, a metricspec starting with non-colon specifies a PMNS
       node as described above, optionally followed by metric output
       formatting definitions.  This so-called compact form of a
       metricspec is defined as follows:

     metric[,label[,instances[,unit/scale[,type[,width[,precision[,limit]]]]]]]

       A valid PMNS node (metric) is mandatory.  It may be followed by a
       text label used with stdout output.  The optional instances
       definition restricts csv and stdout reporting to the specified
       instances of the metric so non-matching instances will be
       filtered out (see -i).  An optional unit/scale is applicable for
       dimension-compatible, non-string metrics.  See below for
       supported unit/scale specifications.  By default, cumulative
       counter metrics are converted to rates, an optional type can be
       set to raw to disable this rate conversion.  For stdout output a
       numeric width can be used to set the width of the output column
       for this metric.  Too wide strings in the output will be
       truncated to fit the column.  A metric-specific precision can be
       provided for numeric non-integer output values.  Lastly, a
       metric-specific limit can be set for filtering out numeric values
       per the limit.

       As a special case for metrics that are counters with time units
       (nanoseconds to hours), the unit/scale can be used to change the
       default reporting (for example, milliseconds / second) to
       normalize to the range zero to one by setting this to sec (see
       also -y and -Y).

       The following metricspec requests the metric kernel.all.sysfork
       to be reported under the text label forks, converting to the
       metric default rate count/s in an 8 wide column.  Although the
       definitions in this compact form are optional, they must always
       be provided in the order specified above, thus the commas.

               kernel.all.sysfork,forks,,,,8

       The third form of a metricspec, verbose form, is described and
       valid only in pmrep.conf(5).

       Derived metrics are specified like regular PMNS leaf node
       metrics.

       Options via environment values (see pmGetOptions(3)) override the
       corresponding built-in default values (if any).  Configuration
       file options override the corresponding environment variables (if
       any).  Command line options override the corresponding
       configuration file options (if any).

OPTIONS         top

       The available command line options are:

       -0 precision, --precision-force=precision
            Like -P but this option will override per-metric
            specifications.

       -1, --dynamic-header
            Print a new dynamically adjusted header every time changes
            in the availability of metric and instance values occur.  By
            default a static header that never changes is printed once.
            See also -4, -7, and -E.

       -2, --overall-rank
            Perform overall ranking of instances in archive.  By default
            ranking (see -J) and reporting happens on each interval.
            With this option all instances and values are ranked before
            a summary is reported.  See pmlogsummary(1) for further
            archive summary reporting alternatives, including averages
            and peak times for values.

       -3, --overall-rank-alt
            Like -2 but print metric instances in pmrep metricspec
            format, to allow easily selecting the instances for further
            investigation.

       -4 action, --names-change=action
            Specify which action to take on receiving a metric names
            change event during sampling.  These events occur when a
            PMDA discovers new metrics sometime after starting up, and
            informs running client tools like pmrep.  Valid values for
            action are update (refresh metrics being sampled), ignore
            (do nothing - the default behaviour) and abort (exit the
            program if such an event occurs).  update implies
            --dynamic-header.

       -5, --ignore-unknown
            Silently ignore any metric name that cannot be resolved.  At
            least one metric must be found for the tool to start.

       -6, --sort-metric=sort-metric
            Specify a sort reference metric to sort output by values
            with -X.  By default sorting order is descending, prepending
            the metric name with the minus sign (``-'') will change the
            order to be ascending.  See also -J and -N.

       -7, --fixed-header
            With -X print a fixed header once (unless using -E)
            including all metrics being reported.  Unlike with the
            default (static) header, only instances with values
            available are reported.  Unlike with the dynamic header, the
            header is not updated even if values for some metrics later
            become (un)available.  See also -1 and -E.

       -8 limit, --limit-filter=limit
            Limit results to instances with values above/below limit.  A
            positive integer will include instances with values at or
            above the limit in reporting.  A negative integer will
            include instances with values at or below the limit in
            reporting.  A value of zero performs no limit filtering.
            This option will not override possible per-metric
            specifications.  See also -J and -N.

       -9 limit, --limit-filter-force=limit
            Like -8 but this option will override per-metric
            specifications.

       -a archive, --archive=archive
            Performance metric values are retrieved from the set of
            Performance Co-Pilot (PCP) archive files identified by the
            archive argument, which is a comma-separated list of names,
            each of which may be the base name of an archive or the name
            of a directory containing one or more archives.  See also
            -u.

       -A align, --align=align
            Force the initial sample to be aligned on the boundary of a
            natural time unit align.  Refer to PCPIntro(1) for a
            complete description of the syntax for align.

       --archive-folio=folio
            Read metric source archives from the PCP archive folio
            created by tools like pmchart(1) or, less often, manually
            with mkaf(1).

       -b scale, --space-scale=scale
            Unit/scale for space (byte) metrics, possible values include
            bytes, Kbytes, KB, Mbytes, MB, and so forth.  This option
            will not override possible per-metric specifications.  See
            also pmParseUnitsStr(3).

       -B scale, --space-scale-force=scale
            Like -b but this option will override per-metric
            specifications.

       -c config, --config=config
            Specify the config file or directory to use.  In case config
            is a directory all files in it ending .conf will be
            included.  The default is the first found of: ./pmrep.conf,
            $HOME/.pmrep.conf, $HOME/pcp/pmrep.conf,
            $PCP_SYSCONF_DIR/pmrep/pmrep.conf, and
            $PCP_SYSCONF_DIR/pmrep.  See pmrep.conf(5).

       --container=container
            Fetch performance metrics from the specified container,
            either local or remote (see -h).

       -C, --check
            Exit before reporting any values, but after parsing the
            configuration and metrics and printing possible headers.

       -d, --delay
            When replaying from an archive, this option requests that
            the prevailing real-time delay be applied between samples
            (see -t) to effect a pause, rather than the default
            behaviour of replaying at full speed.

       --daemonize
            Daemonise on startup.

       -e derived, --derived=derived
            Specify derived performance metrics.  If derived starts with
            a slash (``/'') or with a dot (``.'') it will be interpreted
            as a PCP derived metrics configuration file, otherwise it
            will be interpreted as comma- or semicolon-separated derived
            metric expressions.  For complete description of derived
            metrics and PCP derived metrics configuration files see
            pmLoadDerivedConfig(3) and pmRegisterDerived(3).
            Alternatively, using pmrep.conf(5) configuration syntax
            allows defining derived metrics as part of metricsets.

       -E lines, --repeat-header=lines
            Repeat the header every lines of output.  When not using -1
            or -7 use auto to repeat the header based on terminal
            height.  See also -1 and -7.

       -f format, --timestamp-format=format
            Use the format string for formatting the timestamp.  The
            format will be used with Python's datetime.strftime method
            which is mostly the same as that described in strftime(3).
            An empty format string (i.e. "") will remove the timestamps
            from the output.  Defaults to %H:%M:%S when using the stdout
            output target.  Defaults to %Y-%m-%d %H:%M:%S when using the
            csv output target.

       -F outfile, --output-file=outfile
            Specify the output file outfile.  See -o.

       -g, --separate-header
            Output the column number and complete metric information,
            one-per-line, before printing the metric values.

       -G, --no-globals
            Do not include global metrics in reporting (see
            pmrep.conf(5)).

       -h host, --host=host
            Fetch performance metrics from pmcd(1) on host, rather than
            from the default localhost.

       -H, --no-header
            Do not print any headers.

       -i instances, --instances=instances
            Retrieve and report only the specified metric instances.  By
            default all initially present instances are reported, except
            when writing an archive (see -o), where also all future
            instances will be reported.

            The specified instances are filtered from the initially
            present instances when the tool is starting up.  Thus
            instances which would match the filter appearing after the
            tool has started up will not be reported, use -j to change
            this.

            This is a global option that is used for all set-valued
            metrics unless a metric-specific instance filter is provided
            as part of a metricspec.  By default single-valued ``flat''
            metrics without instances are still reported as usual, use
            -v to change this.

            instances is a comma-separated list of one or more instance
            filter specifications.  Filters containing commas or
            whitespace must be quoted with single (') or double (")
            quotes.  Note that as part of a metricspec on command line a
            list with more than one filter both the list and each filter
            must be quoted as shown below.  It is also possible to
            define a single filter with bars (|) as instance separating
            regex in order to make quoting easier, see below.

            Multiple -i options are allowed as an alternative way of
            specifying more than one non-metric-specific instance
            filters.

            An individual instance filter can be one of the following:

            name   Full instance name.  For example, sda for disk.dev
                   instances or eth0 for network.interface instances.

            PID    Process ID for proc instances.

            command
                   Base name of a process for proc instances.  For
                   example, pmcd would match all pmcd(1) processes
                   regardless of their path or PID.

            regex  Regular expression.  For example, .*python.* would
                   match all instances having the string python as part
                   of their instance name, meaning that this would match
                   all Python processes regardless of their path, PID,
                   or version.

            As an example, the following would report the same
            instances:

                 $ pmrep -i '. minute' kernel.all.load
                 $ pmrep -i '1 minute','5 minute' kernel.all.load
                 $ pmrep -i "'1 minute','5 minute'" kernel.all.load
                 $ pmrep -i '1 minute' -i '5 minute' kernel.all.load
                 $ pmrep kernel.all.load,,"'1 minute','5 minute'"
                 $ pmrep kernel.all.load,,'1 minute|5 minute'

            However, this would report only the 1-minute instance:

                 $ pmrep -i '1 minute','5 minute' kernel.all.load,,'1 minute'

            And this would report all instances (due to per-metric
            regex):

                 $ pmrep -i '1 minute','5 minute' 'kernel.all.load,,.*'

       -I, --ignore-incompat
            Ignore incompatible metrics.  By default incompatible
            metrics (that is, their type is unsupported or they cannot
            be scaled as requested) will cause pmrep to terminate with
            an error message.  With this option all incompatible metrics
            are silently omitted from reporting.  This may be especially
            useful when requesting non-leaf nodes of the PMNS tree for
            reporting.

       --include-texts
            When writing a PCP archive, include PCP metric help texts in
            the created archive.

       -j, --live-filter
            Perform instance live filtering.  This allows capturing all
            named instances even if processes are restarted at some
            point (unlike without live filtering).  Performing live
            filtering over a huge number of instances will add some
            internal overhead so a bit of user caution is advised.  See
            also -1 and -n.

       -J rank, --rank=rank
            Limit results to highest/lowest ranked instances of set-
            valued metrics.  A positive integer will include highest
            valued instances in reporting.  A negative integer will
            include lowest valued instances in reporting.  A value of
            zero performs no ranking.  Ranking does not imply sorting,
            see -6.  See also -2 and -8.

       -k, --extended-csv
            Write extended CSV output, similar to sadf(1).

       -K spec, --spec-local=spec
            When fetching metrics from a local context (see -L), the -K
            option may be used to control the DSO PMDAs that should be
            made accessible.  The spec argument conforms to the syntax
            described in pmSpecLocalPMDA(3).  More than one -K option
            may be used.

       -l delimiter, --delimiter=delimiter
            Specify the delimiter that separates each column of csv or
            stdout output.  The default for stdout is two spaces (``
            '') and comma (``,'') for csv.  When using a non-whitespace
            delimiter, all instances of the delimiter in string values
            will be replaced by the underscore (``_'') character.  Note
            that many default metricsets specify a delimiter (that may
            not be a comma) so it might be necessary to use this option
            with metricsets to explicitly set the delimiter as comma for
            CSV output, i.e. --delimiter=,

       -L, --local-PMDA
            Use a local context to collect metrics from DSO PMDAs on the
            local host without PMCD.  See also -K.

       -m, --include-labels
            Include PCP metric labels in the output.

       -n, --invert-filter
            Perform ranking before live filtering.  By default instance
            live filtering (when requested, see -j) happens before
            instance ranking (when requested, see -J).  With this option
            the logic is inverted and ranking happens before live
            filtering.

       -N predicate, --predicate=predicate
            Specify a comma-separated list of predicate filter reference
            metrics.  By default ranking (see -J) happens for each
            metric individually.  With predicates, ranking is done only
            for the specified predicate metrics.  When reporting, rest
            of the metrics sharing the same instance domain (see
            PCPIntro(1)) as the predicate will include only the
            highest/lowest ranking instances of the corresponding
            predicate.  Ranking does not imply sorting, see -6.

            So for example, using proc.memory.rss (resident memory size
            of process) as the predicate metric together with
            proc.io.total_bytes and mem.util.used as metrics to be
            reported, only the processes using most/least (as per -J)
            memory will be included when reporting total bytes written
            by processes.  Since mem.util.used is a single-valued metric
            (thus not sharing the same instance domain as the process
            related metrics), it will be reported as usual.

       --no-inst-info
            Omit instance information from headers.  Not applicable with
            separate header (see -g).

       -o output, --output=output
            Use output target for reporting.  The default target is
            stdout.  The available output target alternatives are:

            archive
              Record metrics into a PCP archive which can later be
              replayed with PCP tools, including pmrep itself.  See
              LOGARCHIVE(5) and PCPIntro(1) for details about PCP
              archive files.  Requires -F.

            csv
              Print metrics in CSV format (subject to formatting
              options).

            stdout
              Print metrics to stdout (format subject to formatting
              options).

       -O origin, --origin=origin
            When reporting archived metrics, start reporting at origin
            within the time window (see -S and -T).  Refer to
            PCPIntro(1) for a complete description of the syntax for
            origin.

       -p, --timestamps
            Print timestamps.  By default no timestamps are printed.

       -P precision, --precision=precision
            Use precision for numeric non-integer output values.  If the
            value is too wide for its column width, precision is reduced
            one by one until the value fits, or not printed at all if it
            does not.  The default is to use 3 decimal places (when
            applicable).  This option will not override possible per-
            metric specifications.

       -q scale, --count-scale=scale
            Unit/scale for count metrics, possible values include count
            x 10^-1, count, count x 10, count x 10^2, and so forth from
            10^-8 to 10^7.  (These values are currently space-
            sensitive.)  This option will not override possible per-
            metric specifications.  See also pmParseUnitsStr(3).

       -Q scale, --count-scale-force=scale
            Like -q but this option will override per-metric
            specifications.

       -r, --raw
            Output raw metric values, do not convert cumulative counters
            to rates.  When writing archives, raw values are always
            used.  This option will override possible per-metric
            specifications.

       -R, --raw-prefer
            Like -r but this option will not override per-metric
            specifications.

       -s samples, --samples=samples
            The samples argument defines the number of samples to be
            retrieved and reported.  If samples is 0 or -s is not
            specified, pmrep will sample and report continuously (in
            real time mode) or until the end of the set of PCP archives
            (in archive mode).  See also -T.

       -S starttime, --start=starttime
            When reporting archived metrics, the report will be
            restricted to those records logged at or after starttime.
            Refer to PCPIntro(1) for a complete description of the
            syntax for starttime.

       -t interval, --interval=interval
            Set the reporting interval to something other than the
            default 1 second.  The interval argument follows the syntax
            described in PCPIntro(1), and in the simplest form may be an
            unsigned integer (the implied units in this case are
            seconds).  See also the -T and -u options.

       -T endtime, --finish=endtime
            When reporting archived metrics, the report will be
            restricted to those records logged before or at endtime.
            Refer to PCPIntro(1) for a complete description of the
            syntax for endtime.

            When used to define the runtime before pmrep will exit, if
            no samples is given (see -s) then the number of reported
            samples depends on interval (see -t).  If samples is given
            then interval will be adjusted to allow reporting of samples
            during runtime.  In case all of -T, -s, and -t are given,
            endtime determines the actual time pmrep will run.

       -u, --no-interpol
            When reporting archived metrics, by default values are
            reported according to the selected sample interval (-t
            option), not according to the actual record interval in an
            archive.  To this effect PCP interpolates the values to be
            reported based on the records in the archive.  With the -u
            option uninterpolated reporting is enabled, every recorded
            value for the selected metrics is reported and the requested
            sample interval (-t) is ignored.

            So for example, if a PCP archive contains recorded values
            for every 10 seconds and the requested sample interval is 1
            hour, by default pmrep will use an interpolation scheme to
            compute the values of the requested metrics from the values
            recorded in the proximity of these requested metrics and
            values for every 1 hour are reported.  With -u every record
            every 10 seconds are reported as such (the reported values
            are still subject to rate conversion, use -r or -R to
            disable).

       -U, --no-unit-info
            Omit unit information from headers.

       -v, --omit-flat
            Report only set-valued metrics with instances (e.g.
            disk.dev.read) and omit single-valued ``flat'' metrics
            without instances (e.g.  kernel.all.sysfork).  See -i and
            -I.

       -V, --version
            Display version number and exit.

       -w width, --width=width
            Set the stdout output column width.  Strings will be
            truncated to this width.  The default width is the shortest
            that can fit the metric text label, the forced minimum is 3.
            This option will not override possible per-metric
            specifications.

       -W width, --width-force=width
            Like -w but this option will override per-metric
            specifications.

       -x, --extended-header
            Print extended header.

       -X label, --colxrow=label
            Swap columns and rows in stdout output, reporting one
            instance per line, using label as the text label for the
            instance column.  Use an empty string ("") to enable
            swapping without a specific column label.  This change in
            output allows using grep(1) to filter results or to more
            closely mimic other tools.  See also -i and -6.

       -y scale, --time-scale=scale
            Unit/scale for time metrics, possible values include
            nanosec, ns, microsec, us, millisec, ms, and so forth up to
            hour, hr.  This option will not override possible per-metric
            specifications.  See also pmParseUnitsStr(3).

       -Y scale, --time-scale-force=scale
            Like -y but this option will override per-metric
            specifications.

       -z, --hostzone
            Use the local timezone of the host that is the source of the
            performance metrics, as identified by either the -h or the
            -a options.  The default is to use the timezone of the local
            host.

       -Z timezone, --timezone=timezone
            Use timezone for the date and time.  Timezone is in the
            format of the environment variable TZ as described in
            environ(7).  Note that when including a timezone string in
            output, ISO 8601 -style UTC offsets are used (so something
            like -Z EST+5 will become UTC-5).

       -?, --help
            Display usage message and exit.

EXAMPLES         top

       The following examples use the standard PCP facilities for
       collecting the metric values, no external utilities are needed.
       The referenced colon-starting metricsets are part of the default
       pmrep configuration.  With bash and zsh tab completes available
       options, metrics, and after a colon metricsets.

       Display network interface metrics on the local host:
           $ pmrep network.interface.total.bytes

       Display all outgoing network metrics for the wlan0 interface:
           $ pmrep -i wlan0 -v network.interface.out

       Display the slab total usage (in MB) of two specific slab
       instances:
           $ pmrep mem.slabinfo.slabs.total_size,,'kmalloc-4k|xfs_inode',MB

       Display timestamped vmstat(8) like information using megabytes
       instead of kilobytes and also include the number of inodes used:
           $ pmrep -p -B MB :vmstat vfs.inodes.count

       Display per-device disk reads and writes from the host server1
       using two seconds interval and sadf(1) like CSV output format:
           $ pmrep -h server1 -t 2s -o csv -k disk.dev.read disk.dev.write

       Display processes using at least 100MB of memory using dynamic
       headers, additionally use -g to display instance (process) names
       in full:
           $ pmrep -b MB --limit-filter 100 --dynamic-header proc.memory.rss

       Display the predefined set of metrics from the default
       pmrep.conf(5) containing details about I/O requests by current
       pmlogger process(es):
           $ pmrep -gp -i pmlogger :proc-io

       Display the three most CPU-using processes:
           $ pmrep -1gUJ 3 proc.hog.cpu

       Display sar -w and sar -W like information at the same time from
       the PCP archive ./20150921.09.13 showing values recorded between
       3 - 5 PM:
           $ pmrep -a ./20150921.09.13 -S @15:00 -T @17:00 :sar-w :sar-W

       Record most relevant CPU, memory, and I/O related information
       about every Java process on the system, present and future, to an
       archive ./a on one minute interval at every full minute in a
       background process:
           $ pmrep --daemonize -A 1m -t 1m -i '.*java.*' -j -o archive -F ./a \
               :proc-info :proc-cpu :proc-mem :proc-io

       Record all 389 Directory Server, XFS file system, and
       CPU/memory/disk metrics every five seconds for five minutes to a
       PCP archive ./a:
        $ pmrep -t 5s -T 5m -o archive -F ./a ds389 xfs kernel.all.cpu mem disk

       Record process memory and I/O information for those processes
       which are the three most memory-consuming processes:
        $ pmrep -o archive -F ./a -J 3 -N proc.memory.rss proc.memory proc.io

FILES         top

       pmrep.conf
            pmrep configuration file (see -c)

       $PCP_SYSCONF_DIR/pmrep/*.conf
            system provided default pmrep configuration files

PCP ENVIRONMENT         top

       Environment variables with the prefix PCP_ are used to
       parameterize the file and directory names used by PCP.  On each
       installation, the file /etc/pcp.conf contains the local values
       for these variables.  The $PCP_CONF variable may be used to
       specify an alternative configuration file, as described in
       pcp.conf(5).

       For environment variables affecting PCP tools, see
       pmGetOptions(3).

SEE ALSO         top

       PCPIntro(1), mkaf(1), pcp(1), pcp2elasticsearch(1),
       pcp2graphite(1), pcp2influxdb(1), pcp2json(1), pcp2spark(1),
       pcp2xlsx(1), pcp2xml(1), pcp2zabbix(1), pcp-atop(1), pmcd(1),
       pmchart(1), pmdiff(1), pmdumptext(1), pminfo(1), pmiostat(1),
       pmlogdump(1), pmlogextract(1), pmlogsummary(1), pmprobe(1),
       pmstat(1), pmval(1), sadf(1), sar(1), PMAPI(3), pmGetOptions(3),
       pmLoadDerivedConfig(3), pmParseUnitsStr(3), pmRegisterDerived(3),
       pmSpecLocalPMDA(3), strftime(3), LOGARCHIVE(5), PMNS(5),
       pcp.conf(5), pmrep.conf(5), environ(7) and vmstat(8).

COLOPHON         top

       This page is part of the PCP (Performance Co-Pilot) project.
       Information about the project can be found at 
       ⟨http://www.pcp.io/⟩.  If you have a bug report for this manual
       page, send it to [email protected].  This page was obtained from the
       project's upstream Git repository
       ⟨https://github.com/performancecopilot/pcp.git⟩ on 2024-06-14.
       (At that time, the date of the most recent commit that was found
       in the repository was 2024-06-14.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

Performance Co-Pilot               PCP                          PMREP(1)

Pages that refer to this page: pcp2arrow(1)pcp2elasticsearch(1)pcp2graphite(1)pcp2influxdb(1)pcp2json(1)pcp2openmetrics(1)pcp2spark(1)pcp2template(1)pcp2xlsx(1)pcp2xml(1)pcp2zabbix(1)pcpcompat(1)pcpintro(1)pmcd(1)pmchart(1)pmclient(1)pmdumptext(1)pminfo(1)pmlogger_daily_report(1)pmlogsummary(1)pmrepconf(1)pmval(1)pmdiscoversetup(3)zbxpcp(3)pcp-dstat(5)pmrep.conf(5)