flatpak(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | FILE FORMATS | ENVIRONMENT | SEE ALSO | COLOPHON

FLATPAK(1)                       flatpak                      FLATPAK(1)

NAME         top

       flatpak - Build, install and run applications and runtimes

SYNOPSIS         top


       flatpak [OPTION...] {COMMAND}

DESCRIPTION         top

       Flatpak is a tool for managing applications and the runtimes they
       use. In the Flatpak model, applications can be built and
       distributed independently from the host system they are used on,
       and they are isolated from the host system ('sandboxed') to some
       degree, at runtime.

       Flatpak can operate in system-wide or per-user mode. The
       system-wide data (runtimes, applications and configuration) is
       located in $prefix/var/lib/flatpak/, and the per-user data is in
       $HOME/.local/share/flatpak/. Below these locations, there is a
       local repository in the repo/ subdirectory and installed runtimes
       and applications are in the corresponding runtime/ and app/
       subdirectories.

       System-wide remotes can be statically preconfigured by dropping
       flatpakrepo(5) files into /etc/flatpak/remotes.d/.

       In addition to the system-wide installation in
       $prefix/var/lib/flatpak/, which is always considered the default
       one unless overridden, more system-wide installations can be
       defined via configuration files in /etc/flatpak/installations.d/,
       which must define at least the id of the installation and the
       absolute path to it. Other optional parameters like DisplayName,
       Priority or StorageType are also supported.

       Flatpak uses OSTree to distribute and deploy data. The
       repositories it uses are OSTree repositories and can be
       manipulated with the ostree utility. Installed runtimes and
       applications are OSTree checkouts.

       Basic commands for building flatpaks such as build-init, build
       and build-finish are included in the flatpak utility. For
       higher-level build support, see the separate flatpak-builder(1)
       tool.

       Flatpak supports installing from sideload repos. These are
       partial copies of a repository (generated by flatpak create-usb)
       that are used as an installation source when offline (and online
       as a performance improvement). Such repositories are configured
       by creating symlinks to the sideload sources in the
       sideload-repos subdirectory of the installation directory (i.e.
       typically /var/lib/flatpak/sideload-repos or
       ~/.local/share/flatpak/sideload-repos). Additionally symlinks can
       be created in /run/flatpak/sideload-repos which is a better
       location for non-persistent sources (as it is cleared on reboot).
       These symlinks can point to either the directory given to flatpak
       create-usb which by default writes to the subpath .ostree/repo,
       or directly to an ostree repo.

OPTIONS         top

       The following global options are understood. Individual commands
       have their own options.

       -h, --help
           Show help options and exit.

       -v, --verbose
           Show debug information during command processing. Use -vv for
           more detail.

       --ostree-verbose
           Show OSTree debug information during command processing.

       --version
           Print version information and exit.

       --default-arch
           Print the default arch and exit.

       --supported-arches
           Print the supported arches in priority order and exit.

       --gl-drivers
           Print the list of active gl drivers and exit.

       --installations
           Print paths of system installations and exit.

       --print-system-only
           When the flatpak --print-updated-env command is run, only
           print the environment for system flatpak installations, not
           including the user’s home installation.

       --print-updated-env
           Print the set of environment variables needed to use
           flatpaks, amending the current set of environment variables.
           This is intended to be used in a systemd environment
           generator, and should not need to be run manually.

COMMANDS         top

       Commands for managing installed applications and runtimes:

       flatpak-install(1)
           Install an application or a runtime from a remote or bundle.

       flatpak-update(1)
           Update an installed application or runtime.

       flatpak-uninstall(1)
           Uninstall an installed application or runtime.

       flatpak-mask(1)
           Mask out updates and automatic installation.

       flatpak-pin(1)
           Pin runtimes to prevent automatic removal.

       flatpak-list(1)
           List installed applications and/or runtimes.

       flatpak-info(1)
           Show information for an installed application or runtime.

       flatpak-history(1)
           Show history.

       flatpak-config(1)
           Manage flatpak configuration.

       flatpak-repair(1)
           Repair flatpak installation.

       flatpak-create-usb(1)
           Copy apps and/or runtimes onto removable media.

       Commands for finding applications and runtimes:

       flatpak-search(1)
           Search for applications and runtimes.

       Commands for managing running applications:

       flatpak-run(1)
           Run an application.

       flatpak-kill(1)
           Stop a running application.

       flatpak-override(1)
           Override permissions for an application.

       flatpak-make-current(1)
           Specify the default version to run.

       flatpak-enter(1)
           Enter the namespace of a running application.

       Commands for managing file access:

       flatpak-document-export(1)
           Grant an application access to a specific file.

       flatpak-document-unexport(1)
           Revoke access to a specific file.

       flatpak-document-info(1)
           Show information about a specific file.

       flatpak-documents(1)
           List exported files.

       Commands for managing the dynamic permission store:

       flatpak-permission-remove(1)
           Remove item from permission store.

       flatpak-permissions(1)
           List permissions.

       flatpak-permission-show(1)
           Show app permissions.

       flatpak-permission-reset(1)
           Reset app permissions.

       flatpak-permission-set(1)
           Set app permissions.

       Commands for managing remote repositories:

       flatpak-remotes(1)
           List all configured remote repositories.

       flatpak-remote-add(1)
           Add a new remote repository.

       flatpak-remote-modify(1)
           Modify properties of a configured remote repository.

       flatpak-remote-delete(1)
           Delete a configured remote repository.

       flatpak-remote-ls(1)
           List contents of a configured remote repository.

       flatpak-remote-info(1)
           Show information about a ref in a configured remote
           repository.

       Commands for building applications:

       flatpak-build-init(1)
           Initialize a build directory.

       flatpak-build(1)
           Run a build command in a build directory.

       flatpak-build-finish(1)
           Finalizes a build directory for export.

       flatpak-build-export(1)
           Export a build directory to a repository.

       flatpak-build-bundle(1)
           Create a bundle file from a ref in a local repository.

       flatpak-build-import-bundle(1)
           Import a file bundle into a local repository.

       flatpak-build-sign(1)
           Sign an application or runtime after its been exported.

       flatpak-build-update-repo(1)
           Update the summary file in a repository.

       flatpak-build-commit-from(1)
           Create a new commit based on an existing ref.

       flatpak-repo(1)
           Print information about a repo.

       Commands available inside the sandbox:

       flatpak-spawn(1)
           Run a command in another sandbox.

FILE FORMATS         top

       File formats that are used by Flatpak commands:

       flatpakref(5)
           Reference to a remote for an application or runtime

       flatpakrepo(5)
           Reference to a remote

       flatpak-remote(5)
           Configuration for a remote

       flatpak-installation(5)
           Configuration for an installation location

       flatpak-metadata(5)
           Information about an application or runtime

ENVIRONMENT         top

       Besides standard environment variables such as XDG_DATA_DIRS and
       XDG_DATA_HOME, flatpak is consulting some of its own.

       FLATPAK_USER_DIR
           The location of the per-user installation. If this is not
           set, $XDG_DATA_HOME/flatpak is used.

       FLATPAK_SYSTEM_DIR
           The location of the default system-wide installation. If this
           is not set, /var/lib/flatpak is used (unless overridden at
           build time by --localstatedir or --with-system-install-dir).

       FLATPAK_SYSTEM_CACHE_DIR
           The location where temporary child repositories will be
           created during pulls into the system-wide installation. If
           this is not set, a directory in /var/tmp/ is used. This is
           useful because it is more likely to be on the same filesystem
           as the system repository (thus increasing the chances for
           e.g. reflink copying), and we can avoid filling the user's
           home directory with temporary data.

       FLATPAK_CONFIG_DIR
           The location of flatpak site configuration. If this is not
           set, /etc/flatpak is used (unless overridden at build time by
           --sysconfdir).

       FLATPAK_RUN_DIR
           The location of flatpak runtime global files. If this is not
           set, /run/flatpak is used.

SEE ALSO         top

       ostree(1), ostree.repo(5), flatpak-remote(5),
       flatpak-installation(5), https://www.flatpak.org 

COLOPHON         top

       This page is part of the flatpak (a tool for building and
       distributing desktop applications on Linux) project.  Information
       about the project can be found at ⟨http://flatpak.org/⟩.  It is
       not known how to report bugs for this man page; if you know,
       please send a mail to [email protected].  This page was obtained
       from the project's upstream Git repository
       ⟨https://github.com/flatpak/flatpak⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2024-06-04.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

flatpak                                                       FLATPAK(1)

Pages that refer to this page: flatpak-build(1)flatpak-build-bundle(1)flatpak-build-commit-from(1)flatpak-build-export(1)flatpak-build-finish(1)flatpak-build-import-bundle(1)flatpak-build-init(1)flatpak-build-sign(1)flatpak-build-update-repo(1)flatpak-config(1)flatpak-create-usb(1)flatpak-document-export(1)flatpak-document-info(1)flatpak-documents(1)flatpak-document-unexport(1)flatpak-enter(1)flatpak-history(1)flatpak-info(1)flatpak-install(1)flatpak-kill(1)flatpak-list(1)flatpak-make-current(1)flatpak-mask(1)flatpak-override(1)flatpak-permission-remove(1)flatpak-permission-reset(1)flatpak-permissions(1)flatpak-permission-set(1)flatpak-permission-show(1)flatpak-pin(1)flatpak-ps(1)flatpak-remote-add(1)flatpak-remote-delete(1)flatpak-remote-info(1)flatpak-remote-ls(1)flatpak-remote-modify(1)flatpak-remotes(1)flatpak-repair(1)flatpak-repo(1)flatpak-run(1)flatpak-search(1)flatpak-spawn(1)flatpak-update(1)flatpak-metadata(5)flatpakref(5)flatpakrepo(5)